进口气动调节阀_广州奥村阀门有限公司

德国（LIK）莱克品牌,进口气动调节阀（10P00）系列笼式单座调节阀，采用顶部导向不平衡式结构，高强度、重载荷、S型流道、压降损失小、流量系数大、可调范围广、流量特性精度高。该类型调节阀适用于工况压差较小的场合，关闭严密，适用于对介质流量或者压力的调节。

阀笼采用压紧阀座设计，解决了传统的螺纹拧入式阀座拆卸困难，泄漏量大等问题，延长了使用寿命。采用流开式设计，介质趋向于阀门开启的方向，小开度可控性好，流量特性畸变小。根据工况要求可选择降噪音、抗气蚀的特殊阀笼。

GERMANYLIK he 10P00 Series cage single-seat control valve adopts the top guided unbalanced structure, featured by high strength, heavy load, S type flow channel, low pressure drop loss, high flow coefficient, wide adjustable range, high flow characteristic precision, etc. Featured by tight shut-off, this kind of control valve is suitable for applications with relatively low differential pressure. It is suitable for controlling medium flow or pressure.

The cage adopts the press-in type seat design, which solves the problems of difficult disassembly and high leakage of the traditional thread screw-in type seat and prolongs the service life. The flow to open design is adopted, and the medium flow direction tends to the opening direction of the valve with good controllability of small opening and low flow characteristic distortion. Special cages with noise reduction and anti-cavitation functions can be offered according to the requirements in different service conditions.

Parameters of control valves：
Trim features	top guided ,unbalanced trim structure,quick disassembly type structure
Body type：	straight-through type ,angle type
Bonnet type：	standard type ,heat dissipation type ,cryogenic type ,bellows type
Flow	equal percentage
characteristic：	linear quick open
Size：	DN15-200(1/2”-8”) (small flow control valve DN1-DN10)
Pressure class	PN1.6、4.0、6.3Mpa（ANSI 150、300、600LB）
Leakage class	ASME B16.104 Ⅴ（standard type metal seat）,ASME B16.104 Ⅵ（shut-off soft seat）
Pipe connection	flange type ,butt welding type
Pipe connection	flange type ,butt welding type
Applicable	-196C°～ 550C°
Actuator type：	pneumatic diaphragm actuator ,pneumatic piston actuator ,electric actuator

控制阀参数说明
阀内件特点：	顶部导向型.不平衡内件结构,快拆式结构
阀体类型：	直通式 ,角式
阀盖形式：	标准型 ,散热型 ,低温型 ,波纹管型
流量特性：	等百分比 ,线性快开
口径范围：	DN15-200(1/2”-8”) (微小流量调节阀DN1-DN10)
压力等级：	PN1.6、4.0、6.3Mpa（ANSI 150、300、600LB）
泄漏等级：	ASME B16.104 Ⅴ（标准型金属阀座） ASME B16.104 Ⅵ（切断型软阀座）
管道连接方式：	法兰式对焊式
适用温度范围	-196°～ 550°
执行机构类型：	气动薄膜式执行机构,气动活塞式执行机构,电动执行机构