+紧固件  +材数库  +零部件CAD
行业光伏风电氢能液流电池生物质能锅炉储能锂电LED新能源汽车|技术前沿应用专利|专题节能减排生态环保低碳生活|新能源百科
资讯企业动态业内资讯产业分析人物访谈政策法规投资融资统计数据本网公告|展会展会日历本网参展展会动态|产业园
当前所在位置:首页 > 产品 > 储能 > 超级电容 > 超级电容器单体

薄膜电容

薄膜电容
供应商参考报价:面议
  供应商信息
· 深圳市赛佰斯科技有限公司 [广东省] 加为商业伙伴
  发送站内消息
联系人: 翁女士
所在城市: 广东省 深圳市
详细地址: 深圳市福田区梅林街道梅华路深华科技园1号厂房6层东6G6
联系我们 更多产品 进入商铺
  
详细信息  

1)薄膜电容的额定电压必须与本地区电网电压相符合,对于某些电压过高或者有谐波存在的电网,由于高次谐波,尤其是三、五、七次谐波,能量大的,危害也属于较强,在配置时,应采取措施予以避免和隔离。 

1) The rated voltage of the film capacitor must be in line with the local power grid voltage. For some power grids with high voltage or harmonics, due to the high-order harmonics, especially the third, fifth and seventh harmonics, the harm is also strong. In the configuration, measures should be taken to avoid and isolate them.

2)注意运行环境温度。由于过高的运行温度会导致薄膜电容的电化学反应加剧,影响自愈时的热量消散,将导致自愈失败或使用寿命短缩,因此,安装薄膜电容器时应避开热源,改善散热及通风环境。2) Pay attention to the operating ambient temperature. Due to the high operating temperature will lead to the intensification of electrochemical reaction of the film capacitor, affect the heat dissipation during self-healing, and lead to self-healing failure or short service life. Therefore, the installation of thin-film capacitor should avoid heat source, improve the cooling and ventilation environment.

3)电容器柜应设有合理的保护装置: 

3) The capacitor cabinet shall be equipped with reasonable protection device:

①调整合适的延时及放电时间,投入与切除电容器组要配有限流及放电装置。因为薄膜电容内阻小,浪涌电流可能高达上万安倍,为了防止新投入的电容器受到旁侧先投入的电容器对其放电,所以应设置限流保护装置;为了保证运行及维护薄膜电容的安全,必须设置放电装置;① Adjust the appropriate time delay and discharge time. The capacitor bank should be equipped with limited current and discharge device. Because the internal resistance of the film capacitor is small, the surge current may be as high as tens of thousands of ampere times. In order to prevent the newly put in capacitor from being discharged by the capacitor first put in at the side, the current limiting protection device should be set; in order to ensure the safety of operation and maintenance of the film capacitor, the discharge device must be set up;

②投切程序应遵守先投先切,后投后切的原则; 

② The switching procedure should follow the principle of first switching and then switching;

③为了防止频繁投切,电容器组在切除时必须保留足够容量,作为基数组。 

③ In order to prevent frequent switching, the capacitor bank must reserve enough capacity as the base group. 

我要分享: 分享到新浪微博 分享到QQ空间
本供应商产品 更多产品  

Firecomms光模块

ALCON谐振电容

Firecomms光模块

Firecomms光模块
  还没找到想要购买的产品吗?尝试免费发布求购信息,让供应商主动找上门!
    求购产品名:
  同类产品  
- Elna超级电容 - 超级电容 - 锂超级电容电池
- 超级电容器 - 超级电容 - 5V单体电芯测试系统
- 超级电容器 - 超级电容器模组 - 电容
- 超级电容 - 超级电容电池 - 电容器
- 超级电容 - 高压电容 - 电力电容器
- 电解电容 - 涤沦电容 - 贴片电容
- 贴片电容 - 超大容量电容器 - 电解电容
- 高频炉电容器 - 贴片钽电容108 胆 - 无功补偿电容器
- 贴片电容 - 薄膜电容 - 薄膜安规电容
- 电力电容器 - CBB电容 - 超级法拉电容
>> 查看更多相关产品 <<
 
加入我们,让您马上开始做生意!
免费推广产品,免费宣传公司
查找买家信息,结交商业伙伴
想开展网上贸易,提升销量?
推荐您选择能源通会员
能源通会员广告服务网络推广会员积分帮助中心联系我们关于我们 | 官方微博:新浪
新能源网 版权所有 2010-2024 中华人民共和国电信与信息服务业务经营许可证 浙B2-20100234-7
业务QQ:  客服QQ:  推广QQ:
 氢能与燃料电池:点击这里加入此群  太阳能光伏:点击这里加入此群  生物质能:点击这里加入此群  新能源汽车:点击这里加入此群
 储能与锂电池:点击这里加入此群  LED新光源:点击这里加入此群  太阳能光热:点击这里加入此群  风能:点击这里加入此群
杭州创搏网络科技有限公司  总部地址:杭州市西湖区万塘路317号华星世纪大楼12层