+紧固件  +材数库  +零部件CAD
行业光伏风电氢能液流电池生物质能锅炉储能锂电LED新能源汽车|技术前沿应用专利|专题节能减排生态环保低碳生活|新能源百科
资讯企业动态业内资讯产业分析人物访谈政策法规投资融资统计数据本网公告|展会展会日历本网参展展会动态|产业园
当前所在位置:首页 > 产品 > 氢能 > 燃料电池 > 燃料电池原材料

阴阳极膜

阴阳极膜
供应商参考报价:面议
  供应商信息
· 苏州晟尔诺科技有限公司 [江苏省] 加为商业伙伴
  发送站内消息
联系人: 卜令振
所在城市: 江苏省 苏州
详细地址: 苏州市高新区滨河路337号
联系我们 更多产品 进入商铺
  
详细信息  

FBM Bipolar Exchange Membrane with PK reinforcement consists of an anion exchange layer and a cation exchange layer manufactured using a patented multilayer-coating production technology.

    This composite membrane is chemically stable and mechanically reinforced with woven PEEK. In the intermediate layer between Anion Exchange Layer (AEL) and Cation Exchange Layer (CEL), water is dissociated into OH- and H+ ions when exceeding a potential difference of approximately 0.8 V. The CEL must be directed towards the cathode, the AEL must be directed towards the anode, and the mode of operation has to be reverse biased in order to promote the water dissociation reaction.  Under the reverse biased mode, the electrons would be transferred from anode side to cathode side.  Water molecules would naturally diffuse into the intermediate layer between AEL and CEL and generation of H+ and OH- ions would occur as a result of water splitting reaction.  H+ ions will diffuse out from the CEL layer and migrate into the cathode chamber.  OH- ions, on the other hand, would diffuse out from the AEL layer and migrate into the anode chamber. 

    The Fumasep FBM membrane should not be operated under forward bias conditions which may cause blistering at the water dissociation layer. Under forward biasing conditions, water generation reaction will take place at the intermediate layer instead of water splitting reaction.  H+ ions will diffuse into the CEL and OH- will diffuse into the AEL during forward biased operational mode and combination of these two ions at the intermediate layer will create water and hence, accumulation of water will happen over time.  Depending on the duration of the forward biasing mode and current density or voltage, the water that accumulates at the center would eventually damage the bipolar membrane irreversibly.  If the membrane is used in the wrong position at high current density even for short term (specifically referring to forward bias scenario), the interim layer may degrade (blistering or ballooning), and the monolayers may delaminate.  Depending on the operational parameters of the forward biasing, micro-tears or micro-cracks that are invisible to the naked eye may form and initiate the cross-contamination of the electrolytes located in different compartments. 

    The electro-catalytically forced water dissociation produces – in contrast to the classical electrolysis of water – no reaction gases. Therefore, one Mol of OH- and H+ – ions can be achieved at an energy value of approximately 22 Wh (Electrolysis: approximately 55 Wh per Mol).

   Fumasep FBM membrane comes in a 20cm x 28cm size sheet is delivered in wet form.

   Fumatech membranes are highly sensitive to differences in humidity and moisture content. Therefore the membranes can vary +/- 0.5cm from the original cut sizes. Also due to this sensitivity the manufacturer expects wrinkles to form, however soaking the membranes in deionized water will return the membranes to the full size planar state according to the manufacturer.

   Fumasep FBM membrane is Easy to Use and Show:  

 • High water splitting efficiency (> 98% at 100 mA cm-2 in 0.5 M NaCl at 25°C)
 • Low water splitting voltage (< 1.2 V at 100 mA cm-2 in 0.5 M NaCl at 25°C)
 • Excellent mechanical properties at low thickness (0.13 – 0.16 mm)

Fumasep FBM Features:  

 • Application: Salt Splitting
 • Bipolar Exchange Membrane
 • Can withstand high caustic concentrations
 • Thickness: 200 - 250 micrometers (7.8 - 9.8 mil)
 • Size: 20cm x 28cm /20*19cm

Handling:

Please pay attention that the membrane surface is not contaminated with surface active agents or will be damaged by mechanical influence.

High attention must be given to the right polarity when using the membranes!

When mounting the membranes it is imperative that the membrane sides will not get mixed up. Therefore, the cation side is marked with ‘Cathode Side’. This side must be directed towards the cathode (see also drawing overleaf).

Storage:

The membrane should be stored in 1 M NaCl-solution and placed in a closed container. If storage will be for a longer period of time 100 ppm of NaN3 should be added to prevent biological growth. Other biocides have not been used as yet.

The membrane is not stable against chlorine (Cl2).

If you have any concerns before proceeding, please feel free to contact us for further information.

Current – Voltage Characteristics of Fumasep FBM:  

 • 4-chamber set-up: cathode – Na2SO4 – CEM – NaCl – FBM – NaCl – CEM – Na2SO4 solution – anode
 • 4-probe measurement: Haber-Luggin capillary (3 M KCl) with Ag / AgCl reference electrodes
 • CEM: Cation exchange membrane FKB
 • Electrolyte loop: 0.5 M NaCl solution / recombined
 • Electrode loop: 0.25 M Na2SO4 / recombined
 • Temperature: 25°C
 • Fixed scan rate, ΔU = 20 mV, Δt = 20 s

我要分享: 分享到新浪微博 分享到QQ空间
本供应商产品 更多产品  

电池级泡沫铜

电池专用柔性导电

泡沫镍

锂电纽扣电池壳
  还没找到想要购买的产品吗?尝试免费发布求购信息,让供应商主动找上门!
    求购产品名:
  同类产品  
- 质子交换膜燃料电池用PTFE增强质子 - 燃料电池用铝拉网 - 新型钒电池离子膜
- 质子交换膜 - 镧锶钴铁钙钛相电磁材料 - 质子交换膜
- 质子交换膜
>> 查看更多相关产品 <<
 
加入我们,让您马上开始做生意!
免费推广产品,免费宣传公司
查找买家信息,结交商业伙伴
想开展网上贸易,提升销量?
推荐您选择能源通会员
能源通会员广告服务网络推广会员积分帮助中心联系我们关于我们 | 官方微博:新浪
新能源网 版权所有 2010-2024 中华人民共和国电信与信息服务业务经营许可证 浙B2-20100234-7
业务QQ:  客服QQ:  推广QQ:
 氢能与燃料电池:点击这里加入此群  太阳能光伏:点击这里加入此群  生物质能:点击这里加入此群  新能源汽车:点击这里加入此群
 储能与锂电池:点击这里加入此群  LED新光源:点击这里加入此群  太阳能光热:点击这里加入此群  风能:点击这里加入此群
杭州创搏网络科技有限公司  总部地址:杭州市西湖区万塘路317号华星世纪大楼12层