·用于连接IEC标准电机和液压泵
·按照国际VDMA24561标准制作;我司可提供产品选型;
·两端连接法兰均经机加工,可连接ISO标准安装尺寸的各种液压泵;
·电机轴和液压泵轴自动对中,安装方便准确高效;
·标准钟型罩材料采用铝合金,刚性好,可用于重负荷连接;
·Connection elements between IEC motor and hydraulic pump
·Available for nearly all hydraulic pumps ex stock at short notice
·Both mounting sides are finished
·Centred motor shaft and pump shaft
·Standard bellhousings made of aluminium
·材质:铝合金
·PTFL型:自重轻,节约空间
·PTFS型:用于载荷很高,特别是应用复合泵的场合
·Material:Aluminium
·PRFL:Light and space saving construction
·PTFS:Heacy line especially suitable also for multiple pumps
·扭向弹性,免维护
·吸收震动
·轴向可插拔
·全面加工-良好的动态性能
·设计紧凑/惯性小
·Torsionally flexible,maintenance-free
·Vibration reducing
·Axially pluggable
·Machined all over-good dynamic properties
·Compact design/low flywheel sffects
·预应力下无齿隙的连接
·材质:铝合金轴套
·轴向可插拔-安装简易
·尺寸小,转动惯量小
·传动具有柔性,免维护
·便于目测观察
·可配所有常用孔径
·Under initial tension no backlash shaft connection
·Material:Hubs made of aluminium
·Axially pluggable-simple blind mounting
·Small structural simensions-low flyweehl sffects
·Torsionally flexible,maintenance-free
·Simple optical test
·Available for all usual shaft dimensions
·标准材质:钢
·适合下列花键:DIN5480,DIN5482,SECJ498,DIN9611,DIN5463,DIN5481,DIN5472
·轴向可插拔
·全面加工-良好的动态性能
·Standard hub material stell
·Suitable in combination with spline hubs according to:DIN5480,DIN5482,SECJ498,DIN9611,DIN5463,DIN5481,DIN5472
·Axially pluggable
·Machined all over-good dynamic properties
· 双节式曲面齿联轴器
·适用于各种机械工程和液压领域
·塑料盒钢的材料配合,免维护
·可补偿轴向、径向、角向安装误差
·轴向插入装配,非常方便
·成品孔有:公制孔H7,锥孔、英制孔、花键孔等
·Double cardanic curved tooth gear couping
·Use general mechanical engeneering and hydraulics
·Maintenance-free by combination of materials plastic/steel
·Compensation of misalignment of shaft axial-radial-angular
·Axially pluggable-simple mounting
·Available with finish bore metric H7,taper bore and inch bore as well as toothed wheel work
·用于连接内燃机飞轮和液压泵的联轴器
·适合在工程机械,收割机械等液压传动系统的使用
·扭向刚性高,运转无共振
·塑料法兰和刚性轴套连接,免维护
·塑料法兰具有很高的机械强度和热稳定性
·安装长度极端
·轴向插入装配,安装简单方便
·Flange coupings for assembly to combustion engines and hydraulic pumps
·Use for all hydrostatic drives of machines for stuctural engineering,harvesters etc
·High torsional rigidy-operation without resonance
·Maintenance-free by combination of materials plasitic/steel
·Plastic flange with high mechanical strength and temperature dimensional stability
·Extremely short assembly
·Simple mounting by axial fitting
·清洗盖V324和V449符合DIN24339标准
·材质:铝合金
·所以清洗盖安装螺丝***大扭紧力矩10牛米
·可定制公司标志
·***大可承压0.5bar
·Cleaning covers V324 and V449 according to DIN24339
·Made fro aluminium
·Screw tightening torque for all cleaning cover sizes 10nm
·On request available with logo
·Max.permissible pressure=0.5bar
·
·
·
·
·
·
·
·