240W单晶组件_金华东球能源科技有限公司

Product Description:

Specification
Cells	Mono crystal 156mmx156mm square
Number of cells	60 (6x10) series connected
Typical application	24V DC
Maximum voltage	1000V DC
Size	1640(L) x992(W) x50(H) mm
Weight	23 Kgs
Front glass	4 mm

Tolerance
Parameter	Values	Unit
Operating temperature	-45 to 80	℃
Hail diameter @ 80Km/h	Up to 25	mm
Continuous wind pressure	Up to 24	m/s

Connection terminals
Connector type	MC4

Parameter
Note: defined as standard deviation of thousands measurements.Absolute power values depend on the measuring system.They can differ by +/- 3% from one measuring system to another.
Model	DSP240D
Rating power (Pm)	240W
Efficiency of cell	≥16.66%
Tolerance	±3%
Rated current (Im)	8.11A
Rated voltage (Vm)	29.6V
Short circuitCurrent (Isc)	8.32A
Open circuit Voltage (Voc)	38.4V
NOCT:45℃+2℃	Temperature coefficient Voltage: 0.16V/℃ / -(160 +10)mV/oC
	Temperature coefficient of power: -(0.5+0.05)%/oC
	Temperature coefficient Current: 0.06%/℃ / (0.065 +0.015)%/oC

Characteristic curves
Mechanical characteristics
Dimensions
Certificate	CE

Features:
High-Efficiency and high power output
- utilizing high-quality and high-efficiency solar cells in the modules to ensure high power output.
- Reinforced Solar Glass
- The use of high-transparency low-iron tempered glass allows maximum light permeability while enhancing stiffness and impact resistance.
- Advanced Cell Encapsulation
- The interconnected cells are embedded in ultra transparent EVA with multilayer backsheets for additional weather protection.

Stability:
- Bypass diode minizes the power drop caused by shade
- Optimized Module Surface Area
- The distance between the frame edge and the cell circuitry is calculated according to the electrical output optimization.
- Easy installation
- The specially designed module frame makes installing process easy.

Strong and reliable:
- Anodized aluminum frame substantially increases module endurance against high winds and snow load.
- Tight Quality Control
- We employ quality control standards at each stage of the production. All modules are designed and manufactured in our ISO9001 certified factories
- Surpassing Industry Standards
- Our modules meet the highest industry standards possible in accordance to CE, ISO9001, IEC and TUV certifications. ut.