太阳能控制器_深圳市和合晋电子商务有限公司

notice: Not True MPPT,there is no large transformer coil inside.

Package including:
1. 1pcs 20a controller
2. 1pcs user manual
3. 1pcs temp sensor

Solar LCD series a kind of intelligent, multi-purpose solar charge and discharge controller

LCD screen display	Battery reverse discharge protection
Easy operation interface	Battery reverse polarity protection
MPPT+ PWM charging mode	Battery under voltage protection
Parameter user can reset	Overload, short-circuit protection
A key to open and close the load	Automatic temperature compensation function
A key to restore the factory settings	USB 5V charging (for 500mA) for mobile phone

Features:

Solar LCD series a kind of intelligent,multipurpose solar charge and discharge controller

1, LCD screen display
2, Easy operation interface
3, PWM charging mode
4, Parameter user can reset,
5, A key to open and close the load,
6, A key to restore the factory settings,
7, Battery reverse discharge protection,
8, Battery reverse polarity protection
9, Battery under voltage protection,
10, Overload, short-circuit protection,
11, Automatic temperature compensation function,

Parameter table

Parameters / Model	MPPT10	MPPT20	MPPT30	MPPT40
Maximum power current	12A	20A	30A	40A
Installation Lin（mm2）	4mm2	8mm2	10mm2	12mm2
Installation Line(AWG)	10(AWG)	8(AWG)	7(AWG)	6(AWG)
Weight	280g	300g	475g	480
Dimensions	143×89×46（mm）		1879761（mm）
System load loss	≤13mA
Loop Buck	≤100mV

Battery float voltage	13.8V（12V system）/27.6V（24V system）
Battery （under voltage) protection	10.6V（12V system）/21.2V（24V system）
Battery （under voltage) recovery voltage	12.6V（12V system）/25.2V（24V system）
Charge mode	MPPT+PWM MODE
Operating Temperature	-10℃~60℃
Storage Temperature	-30℃~70℃
Humidity requirements	≤90％, No condensation
Temperature compensation	-4mV/Cell/℃
Temperature Probe (built components)	NTC 100K thermistats
Maximum open circuit voltage of the solar panel	18V-24V（12V system）36V-48V（24V system）
Solar panels maximum open circuit voltage (V)	≤48V

(Cases) 12V system standard configuration (only applicable to our solar charge controller)

The peak voltage of the solar cell panel	18V-25V	18V-25V	18V-25V	18V-25V
Peak power of solar cell panel	50W-130W	100W-260W	200W-380W	≤500W
Solar Charge Controller Model	MPPT10	MPPT20	MPPT30	MPPT40
Battery standard voltage	12V	12V	12V	12V
Battery capacity configuration	≥100AH	≥200AH	≥300AH	≥400AH
Installation Lin（mm2）	4mm2	8mm2	10mm2	12mm2
Installation Line(AWG)	10(AWG)	8(AWG)	7(AWG)	6(AWG)