口腔材料咀嚼循环疲劳试验机
牙科材料和结构口腔咀嚼疲劳循环测试的新工具。
疲劳测试仪使用强大的螺线管来提供高达350N的平稳加载。载荷选择在个人计算机上显示和控制。一次***多可以将四个样本循环疲劳,同时样品可以浸泡在37'C水中。
不需要传统昂贵的单样品疲劳测试!使用疲劳测试仪,可以改变加载程序,以施加频率高达2Hz,周期从10N到350N的正弦波,三角波或阶梯波。通过在线称重传感器提供闭环控制,以实现连续的加载。
口腔疲劳试验机生物医用材料动态疲劳生物力学试验机主要是用于口腔材料、可降解生物材料和生物医用材料循环力学测试,广泛应用于口腔材料、可降解骨植入物、可降解骨钉骨板、“新型合金材料、复合生物材料、形状记忆合金、组织工程三维支架、人工骨、人工软骨、人工半月板、人工椎间盘等领域。
电机疲劳试验机与传统的液压伺服疲劳试验机的相比较,个人认为主要还是电机动态疲劳试验机的优点:
1. 干净,不用担心漏油等现象
2 稳定,不会因为阻力的变化影响设备运行的稳定性
3 噪音低,传统的液压伺服必需把泵放的更远,以减少噪音
4 安装维护简单方便,不用经常停机更换液压油等等工作,后续的电机维护成本几乎为零,但是液压伺服的设备,使用频率越高维护成本也越高,到了***后因无法忍受高额的维护成本而减少设备的使用。
5 省电无需水源,使用成本低,一般电机的功率只有几千瓦或几百瓦。
6 安全,不用担心高压油管长时间的使用,老化了高压油的泄漏而造成人身的安全影响。
7 使用寿命长,几乎免维护的电机可以长时间不间断的使用
口腔疲劳试验机生物材料动态疲劳试验机主要是指用电机驱动的在口腔生物医学材料中应用,由于噪音低干净,效率高,性价比高等等原因,在生物医学研究领域受到追捧,由于生物医学材料一般会考虑到实际应用条件,因此需要在尽量模拟人体环境中,如恒温水浴环境条件下,四个样品可以在同等载荷和频率条件下,四个样品也可以在不同的载荷和频率条件下,使样品的研究可以进行横向比较,并提高了研究测试效率。
***大动态载荷350N
***高频率 2HZ
A new tool for fatigue cycling of dental materials and structures.
The Fatigue Tester uses powerful solenoids to provide smooth loading to levels of up to 350N. The force levels are displayed and controlled on a personal computer. Up to four specimens at a time can by cycled while suspended in 37'C water.
No more tying up your single-axis test machine for weeks! With the Fatigue Tester, the loading routine can be varied to apply a sinewave, triangular or step wave at frequencies up to 2Hz and cycle from 10N to 350N. Closed-loop control is provided by in-line load cells to continuously calibrate the individual coils.
The control software, DasyLab by IOTech, comes installed on a new Pentium computer. This flexible and intuitive control package uses a PID command algorithm for fast, accurate loading of the specimens. It allows the user to easily configure new test conditions and display arrangements using a drag-and-drop intererface. Or use the included templates for standard tests. The system also has the ability to monitor four additional analog and four digital inputs for recording specimen damage or failure.